- HOME
- Products
- Air treatment System
Air treatment System
Fully filtered solids and water, remove carbide materials and molecules. It can be applied to be high quality cartridge by computational bolt.
Air Filters(YF Series)
- The maximum flow rate MAIN•PRE FILTER pressure 0.3kgf/㎡, LINE 0.1㎛, COAELSCENT 0.01㎛, when ADSORBENT FILTER is0.2 - 0.4 kgf/㎡ , pressure is on 7kgf/㎡ STD. Filtered air flow is N㎡/min.
- FILTER 200A over is made to order..
- SUS FILTER is made to order.
- 65A, 80A, 100A FILTER leg attachment is made to order. (150A over is on basis.)
- 65A over Korea Occupational Safety Authority approved.
TECHNICAL DATA(YF-15A ~ YF-250A)
| FILTER TYPE | MAIN FILTER | PRE FILTER | LINE FILTER | COALESCENT FILTER | ADSORBENT FILTER | ELEMENT | DIMENSION | WEIGHT | |
|---|---|---|---|---|---|---|---|---|---|
| 370 | 320 | 310 | 130 | 150 | Q'TY | Width | Height | (kg) | |
| 40㎛ | 5㎛ | 1㎛ | 0.01㎛ | 0.001PPM | |||||
| Nm³/min | Nm³/min | Nm³/min | Nm³/min | Nm³/min | |||||
| YF-15A | 2.2 | 108 | 1.2 | 1 | 1 | 1 | 105 | 360 | 2 |
| YF-20A | 5.7 | 3.5 | 2.8 | 1.9 | 1.9 | 1 | 105 | 360 | 2 |
| YF-25A | 8 | 5.7 | 5 | 3.4 | 3.4 | 1 | 105 | 600 | 3 |
| YF-40A | 17 | 14 | 11 | 10 | 10 | 1 | 150 | 890 | 6 |
| YF-50A | 29 | 25 | 22 | 14 | 14 | 1 | 150 | 1,060 | 8 |
| YF-65A | 58 | 49 | 48 | 27 | 27 | 2 | 550 | 1,348 | 59 |
| YF-80A | 88 | 73 | 72 | 42 | 42 | 3 | 550 | 1,348 | 64 |
| YF-100A | 139 | 120 | 110 | 70 | 70 | 5 | 650 | 1,426 | 113 |
| YF-125A | 162 | 145 | 132 | 84 | 84 | 6 | 650 | 1,238 | 130 |
| YF-150A | 282 | 221 | 176 | 112 | 112 | 8 | 750 | 1,936 | 163 |
| YF-200A | 447 | 331 | 308 | 196 | 196 | 11 | 830 | 2,048 | 173 |
| YF-250A | 733 | 555 | 528 | 330 | 330 | 19 | 1,100 | 2,580 | 520 |
Filter Element
| Filter Element No. | Filteration Particle |
Dimension | Media Grade No. |
|||
|---|---|---|---|---|---|---|
| "A" | "B" | "C" | "D" | |||
| YPE-25A-310 | 1㎛ | 63 | 395 | 340 | 55 | 10C15-130 |
| YPE-25A-130 | 0.01㎛ | 63 | 395 | 340 | 55 | 4C15-130 |
| YPE-25A-150 | 1ppm | 63 | 395 | 340 | 55 | A15-130 |
| YPE-40A-310 | 1㎛ | 72 | 570 | 490 | 80 | 10C25-262 |
| YPE-40A-130 | 0.01㎛ | 72 | 570 | 490 | 80 | 4C25-262 |
| YPE-25A-150 | 1ppm | 72 | 570 | 490 | 90 | A25-262 |
| YPE-25A-310 | 1㎛ | 84 | 755 | 675 | 90 | 10C25-262 |
| YPE-25A-130 | 0.01㎛ | 84 | 755 | 675 | 90 | 4C25-262 |
| YPE-25A-150 | 1ppm | 84 | 755 | 675 | 90 | A25-262 |
- - AS above specification based on as followed.
[1] Around temperature : 20℃ [2] pressure drop rate : within 3% - - YPE Type : Import, ELEMENT(option)
Element
| MODEL | MAIN / PRE (YFE-370, 320) |
LINE (YFE-310) | COALESCENT (YFE-130) |
ADSORBENT (YFE-150) |
|---|---|---|---|---|
| Structure and Materials |  |
 |
 |
 |
| maintenance | Use mild detergent | Cartridges exchange | Cartridges exchange | Cartridges exchange |
| Filter | Removal solid body over 40㎛, 5㎛(100%) | Removal solid body over 1㎛(100%) | Removal solid body over 0.01㎛(100%) | Removal solid body over 0.001㎛(100%) |
| Materials | Sintered resin | HEPA | HEPA / Polyester | HEPA / Polyester / Activated carbon paper |
| Installation Site | MAIN LINE/ Refrigerated Air Dryer or Filter(YFE-310, 130, 150) be installed in front.. It should be used for Preventing condensate flows. | Installed in the pipe end portion or desiccant dryer, Filter (YFE-130, 150) be installed in front, in order to extend the life cycle of the advanced filter | Install in area of oil and moisture to be removed, if you set up in front of desiccant dryer, increase the absorbent life. | As a filter for installation in the final end of the pipe line to remove the solid matter than 0.001ppm, install a site of clean compressed air needed. |
| Repair and replacement | Element should be cleaned, when foreclosure is 0.7㎏/㎠.. and the mild detergent and gasoline, paint thinner should not be used | When the differential pressure 0.5㎏ / ㎠ over, disassemble the filter and replace the cartridge in the filter with a new one | ||